How to ensure good adhesive

The most important process in adhesion is application of the adhesive. Your problems can be solved by the applicator which enables a desired amount of the adhesive to be applied to a desired position efficiently and simply in the way exactly as you desire, thereby providing excellent looks.
  • Easy handling and maintenance of the equipment
  • Discharge of a very small amount
  • An extensive range of use from assembly of the prototype to line assembly
Adhesive type Applicator Product Name Container
Cyanoacrylate Technoshot V 3000RX, 3000DX
3000RXP, 3000-Super series 		20g- and 50g-
plastic container
One-part type Auto tube Super-X, PM165, PM300, etc. Tube, cartridge
Dispense gas Medium, high viscosity products in
tube and cartridge 		Special syringe
Two-part type MGP ID-200
MGP ID-300
MGP-X020
MGP-X030 		EP001 EP330 EP331
EP007 EP0088 1500 1590 		Special tank


Discharge unit specifically designed for Cemedine 3000
Technoshot V




This is a highly reliable unit for continuous discharge of a specified amount of instantaneous adhesive, incorporating the Teflon tube type roller pump using the planetary motion rotor mechanism.

Features

  1. Use of the frame specifically designed for the bottle prevents the container from overturning, ensuring working safety without cyanoacrylate adhesive contacting your hand or body.
  2. Adoption of the one-touch tube guide provides easy and reliable replacement of the Teflon tube.
  3. The digital timer control system enables reliable and highly accurate discharge of a specified amount of adhesive.
  4. Adjustment of the vacuum controller ensures excellent liquid separation, and prevents cyanoacrylate adhesive from curing at the nozzle tip.
  5. The vacuum interval controller permits adjustment of the interval before reaching the vacuum after termination of the discharge.
One-Part Discharge Unit
Auto-Tube

 

 
This is a one-part discharge unit which allows the adhesive in the tube or cartridge to be charged into the discharge unit, and the coating work to be carried out directly. The specifically designed controller provides free control of the amount to be discharged.

 

Product Name

Ο Digital controller
Ο Power cord
Ο 1.8-meter pneumatic hose with coupler
Ο Foot pedal switch
Ο 10ml node rip system
Ο (syringe, piston, cap, tip cap)
Ο Taper nozzle, Class 5, tip cap
Ο Chargeing adapter
Ο Inner container
Ο Outer container
Ο Holder cap
Ο Pneumatic hose
Ο Tip adapter
Ο Tube adapter


The 100-gram and 200-gram tubes and 333-ml cartridge are available.



Features
 
  1. This unit allows mounting and dismounting of the tube and cartridge by one-touch operation, keeping your hands clean.
  2. It features repeatability of 0.1% and the minimum discharge rate of 0.001 ml, without any possibility of the foam or dust being mixed.
  3. The adhesive in the tube is pushed out pneumatically, thereby minimizing loss.
  4. The attached charging adapter allows the adhesive to be charge into the syringe by one-touch operation.
One-Part Discharge Unit
Dispense Gun (Handy Type)


 

The dispense gun is composed of a precision machined syringe and small-sized, lightweight and sturdy piston type gun.

This is a handy type dispense gun which does not require use of a power supply or pneumatic source. It can be used for an extensive range of application from assembly of the prototype to production in small quantities, including selection of the test for selection of the adhesive.



Features

  1. Simple adhesion work with your hands kept clean.
  2. Trigger span adjustable in two steps.
  3. Special syringe ensuring simple installation, without wetting by liquid.
  4. Dispense guns available for use with 3ml, 5ml, 10ml, 30ml and 50ml syringes.
 
Two-part mixed discharge unit
MGP series
 
Controlling the MGP micro gear pump renowned for its quantitative stability is controlled by the stepping motor (MGP ID-200), servo motor (MGP ID-300), and special control circuit, two-part mixed discharge unit has high discharge accuracy and capability to support automation and features very easy setting and management of discharge volume.

The cartridge type mixer also features easy replacement and cleaning.
 
Features
 
  1. The discharge management function required for mixed discharge of two-part adhesive is incorporated. (MGP ID-200 and MGP ID-300)
  2. The discharge volume, discharge time, and mixing ratio can be easily set based on basic data. (MGP ID-200 and MGP ID-300).
  3. Use of the micro-gear pump ensures extremely stable discharge at a fixed rate, without being affected by such conditions as temperature, viscosity and specific weight.
  4. The mixer is designed to correspond to the quick curing type adhesive, and provides a stable, longer-time, continuous operation even with adhesive of shorter pot life.
   
MGP ID-200 MPG-X020 (for the discharge of a very small amount) MGP ID-300 MGPX030 (for the discharge of a great amount)
   

 
© 2005 Asia Cemedine Co., Ltd. All rights reserved.